Filter
Top Products
[ 34 ] CALLER ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s name and
phone number on the display before you answer the phone. Additionally, you can dial the
displayed number and store the information for memory dialing.
Make sure you have turned on the Caller ID/Call Waiting feature. (See page 15.)
Important:
Memory locations for Caller ID messages and Phonebook locations (including Speed Dials)
are common, you can store up to 100 in total. A Caller ID message is not stored when you
have stored 100 of the phonebook locations. The earliest Caller ID message is overwritten
when you have stored 100 of the phonebook locations and Caller ID messages in total.
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the
Caller ID message will
not appear.
• When the call is received
via a telephone company
that does not offer
Caller ID service, the
caller´s phone number
and name do not appear.
(This includes some
international calls.)
• When the call is via a
private branch exchange
(PBX), the caller´s phone
number and name may
not appear.
1) When the Caller ID message is received, the display shows the caller’s phone number
along with the date and time. The incoming call information is stored in the Caller ID
record. If the Caller ID service includes the
caller’s name, the name will appear on the
display. (up to 15 characters.)
You may receive any one of the following messages:
When invalid data is received “
Incomplete Data”
When a private name is received “
Private Name”
When a private number is received “
Private Number”
When a unknown name is received “
Unknown Name”
When a unknown number is received “
Unknown Number”
2) When you pick up the phone, the display changes to “
Talk”.
(AutoTalk feature is set to On.)
Caller ID
• If any of the following occurs during Caller ID operation, the operation will be canceled.
-Press
end. The phone will return to the standby mode (or the call will be disconnected).
-Press
talk/flash or spkr. (except for during hands-free conversation)
-Receive an incoming call, page, or transferring call (from the standby mode only).
-Receive a CIDCW (Caller ID on Call Waiting) (during a call only).
-Charge the handset.
• The idle time is 30 seconds. If the handset remains idle for 30 seconds, the phone will return to the
standby mode (or back to the call).