Uniden TRU5860 Cordless Telephone User Manual


 
GETTING STARTED
GETTING STARTED [ 15]
To change your Caller ID options:
1) When the phone is in the standby mode, press
menu/mute.
2) Press
+ or - to move the pointer to Caller ID Setup,
then press
select/ch.
3) Press
+ or - to choose Auto Talk or CIDCW,
then press
select/ch.
4) Press
+ or - to change the selection.
AutoTalk:
Auto Talk On or Auto Talk Off
CIDCW:
CIDCW On, CW Deluxe On or CIDCW Off
5) Press
select/ch and you will hear a confirmation tone.
6) Press
end to exit.
Setting Caller ID Options
There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting),
and Area Code. See page 16 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing
talk/flash or spkr. If the phone
rings when AutoTalk is On, simply remove the handset from the base and the phone
automatically answers the call. Or if the handset is not in the base, press any number key,
/tone, or # to answer the call. If you set AutoTalk to Off, you must press talk/flash or
spkr to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 38.)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.