Filter
Top Products
6
2. When REGISTRATION COMPLETE. is displayed; the handset
has been registered to the base. If REGISTRATION FAILED.
appears, please try these steps again.
ELT560
•Remove the battery compartment cover from the
bottom of the main base.
•Press and hold the
Registration
button located in the
battery compartment until the base LEDs start
blinking.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8860
TRU8865
•Disconnect the base AC adapter.
•While holding the [find handset], reconnect the AC
Adapter.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8866
TRU8885
•Disconnect the base AC adapter.
•While holding the
[flash/find hs], reconnect the AC
Adapter.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8880
•Disconnect the base AC adapter.
•While holding the
[find hs/intercom], reconnect the
AC Adapter.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
MODEL DIRECTIONS: