Filter
Top Products
4
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charger.
1. Connect the AC
adapter to the
DC
IN 9V
jack and to a
120V AC outlet that
is not controlled by
a wall switch.
Caution: Use only
the Uniden AD-0005
adapter.
2. Set the charger on
a desk or tabletop,
and place the handset in the charger with the keypad facing
forward.
3. Make sure that the
charge
LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the charging contacts on
the charging cradle.
4. Charge the handset battery pack for at least 15-20 hours before
using your new handset for the first time.
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has previously been registered to a base, you must reset
the handset before you can register it to a new base.)