Filter
Top Products
16
Using Hold, Conference, Transfer and
Intercom
Put a call on
hold
Press [int'com/hold]. If you leave a caller on hold
for more than five minutes, the call will be
disconnected. To return to the party on hold, press
[/flash] or [].
Join a call in
progress
To join a call already in progress, press [ /flash] or
[]. You can hang up normally; the other station
remains connected to the call.
Transfer a call
Press [int'com/hold]; the call will automatically be
placed on hold. Use
[] or [] to select the
station you want to transfer the call to, and press the
OK
soft key. (To page all stations at once, select
ALL.) When the other station answers, you can talk
to the station; the outside call remains on hold. If the
other station accepts the call, you will be
disconnected.
Cancel a
transfer
To cancel the transfer and return to the call, press
[/flash] or [].
Accept a
transferred call
To answer the page and speak to the transferring
station, press
[ /flash] or [int'com/hold]. To
accept the call and speak to the caller, press
[/
flash] again.
Make an
intercom page
With the phone in standby, press [int'com/hold].
Use
[] or [] to select the station you want to
talk with, then press the
OK
soft key. (If you select
ALL, all other stations will be paged.)
Cancel a page
To cancel the intercom page, press the
CANCEL
soft
key or
[].
Answer an
intercom page
Press [ /flash] or [int'com/hold]. If AutoTalk is
on, the handset automatically answers the page
when you remove it from the cradle.