Filter
Top Products
GETTING STARTED [ 15]www.uniden.com
When to Re-register Handsets
1) You’ll need to re-register the second handset (follow steps on page 14) each time
the digital security code is changed. Refer to page 40 for details regarding the
Digital Security Code.
2) When there is a power failure for more than one hour:
If power failure occurs (e.g. due to electrical storm or if the unit is unplugged
during a move), both handsets will need to be re-registered. To re-register, follow
the same registration process on page 14.
3) If the second handset’s battery becomes very low, the handset must be recharged
for 15-20 hours and re-registered to the main base unit.
Call Transfer Feature
Your cordless phone allows you to transfer outside calls from handset to handset,
only one handset at a time can talk with an outside caller. The second handset
cannot go off hook to listen to conversations or make an outgoing call while the
other handset is in use.
To transfer a call
1) During a call, press delete/transfer. The call will
automatically be placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone stops. To cancel the transfer
and return to the caller, press
delete/transfer or talk/flash on the handset.
To receive a transfer call (from the second handset)
Pick up the handset from the base (when AutoTalk is set to on),
or pick up the handset and press
talk/flash to answer the
transferred call. Additionally, you can answer the transferred call
by pressing any number key,
/tone/ or #/ (when AutoTalk is set to on).
• Make sure to return the
handsets to the charg-
ing cradles after each
phone call.
• If you transfer the call
and it is not picked up
after 5 minutes, the
call will be
disconnected.
GETTING STARTED