Filter
Top Products
GETTING STARTED
GETTING STARTED [ 11]www.uniden.com
Place the power cord
where it does not create
a trip hazard or where
it could become chafed
and create a fire or
electrical hazard.
Use only the supplied
AD-314 AC adapter for
the main base and
AD-310 for the
charging cradle. Do not
use any other AC
adapter.
• Connect each AC adapter to a continuous power supply.
• Place the main base unit and charging cradle close to the AC outlets so that you
can unplug the AC adapters easily.
C. Connect the main base unit and charging cradle
1) Connect each AC adapter to the DC IN 9V jack
and to each standard 120V AC wall outlet.
2) Place one handset in the main base unit and
the other in the charging cradle.
3) Make sure that the
charge/in use and charge
LED illuminate. If the LED does not illuminate,
check to see that the AC adapter is plugged in
and that the handset makes good contact with
the cradle’s charging contacts.
Route the cord.
• Charge your handsets at least 15-20 hours before plugging into the phone line.
4) Once the handset battery pack is fully
charged, connect the telephone line cord to
the
TEL LINE jack and to a telephone outlet.
Modular
If your telephone outlet isn't modular,
contact your telephone company
for assistance.