Filter
Top Products
GETTING STARTED[ 10 ] www.uniden.com
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on the handsets, main base unit and
charging cradle once a month. Using water only, dampen a
cloth to clean the charging contacts. Then make sure to
go back over the charging contacts with a dry cloth before
returning the handsets to the main base unit or charging
cradle to charge.
The last number dialed in the redial memory, the Menu display options, the names and
the numbers stored in the memory locations or CID list are retained for up to 30 minutes
while you replace the battery pack.
Low battery alert
When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order to
save power. If the phone is not in use,
Low Battery flashes
on the LCD and none of the keys will operate.
If the phone is in use,
Low Battery flashes and the handset
beeps. Complete your conversation as quickly as possible and
return the handset to either cradle for charging.
Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and damage the finish.
• Even when the
battery pack is not
being used, it will
gradually discharge
over a long period of
time. For optimum
performance, be sure
to return the handset
to either cradle after
a telephone call.
• Talk Mode -
The handset is off
either cradle and
talk/flash has been
pressed, enabling a
dial tone.
• Standby Mode -
The handset may be
sitting in or off either
charging cradle but is
NOT in use. The
talk/flash key has
not been pressed and
there is no dial tone.