Filter
Top Products
ADDITIONAL INFORMATION
[ 47 ]
ADDITIONAL
INFORMATION
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See page 6.)
In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code.
11
Remove the handset from the base unit.
Press on the base.
22
While the handset is emitting the paging sound,
replace the handset to the base unit. The paging
tone stops.
Leave the handset on the base for more than
3 seconds. A random, new security code is set.
page/int'com
If the handset battery pack
is completely discharged or
the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time the
battery pack is charged.
TRU3485_new 8/7/00 5:23 PM Page 47