Filter
Top Products
MEMORY DIALING[ 22 ]
55
Press . “Store Number“ is displayed.
The cursor flashes indicating that the display is ready
for the number to be entered.
66
Use the number keypad to enter the phone number.
The phone number cannot exceed 20 digits.
• Use to enter pause in the dialing sequence.
The display shows a “
P“. Each pause counts as one
digit and represents a two second delay of time between
the digits.
• Use to delete digits as needed.
77
Press . The handset beeps and displays the
confirmation screen. Memory storage is complete.
For example, if you store a name and number into
memory location number 07, the display shows
“
Memory07 Stored“.
After about 2 seconds, “
Memory Store“ is displayed.
88
Press to return to standby mode.
delete/int com
• The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
• The 10 memory locations
in the base are
independent locations
from the handset.
Store Number
8178583300
Memory07 Stored
Memory Store
07 UNIDEN CORP
08
WWiitthh tthhee BBaassee
11
Press . The
ssttaattuuss
LED blinks.
22
Dial the number you wish to store.
(The phone number cannot exceed 20 digits.)
33
Press . Enter the memory location number (0-9)
on the keypad. The
ssttaattuuss
LED goes out.
A confirmation tone sounds and the number is stored.
Store Number
• The 10 memory locations
are represented by the
numbers 0-9 on the
keypad. If you store a
number in one of
locations, then attempt
to store a different
number in the same
location later, the new
number will overwrite
the previous one.
TRU3485_new 8/7/00 5:22 PM Page 22