Filter
Top Products
[ 45 ]
THE INTEGRATED
ANSWERING DEVICE
RReemmoottee aacccceessss aawwaayy ffrroomm hhoommee
You can operate your answering system from a remote location using any touch-
tone telephone. Use this function to check for recorded messages, to play or
delete messages, to record a new outgoing message, and to monitor sounds in
the room.
11
Call your telephone number.
22
While the greeting message is played, press # and your PIN code within
2 seconds.
If the answering system is off, let it ring 10 times. The tone sounds. Then,
press # and your PIN code within 2 seconds.
33
The answering system announces the time and day and the number of
messages stored in memory. Then the message playback automatically begins.
44
You may continue to listen to your message, or you may select a command
from the following chart.
55
After all of your messages have played, or the playback time exceeds 4
minutes, you will hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at this time from
the chart above.
• During the remote
operation, displays
on the base.
• You must enter a
command within 15
seconds when entering
command waiting mode
is started otherwise the
answering system
automatically hangs up
and returns to standby.
• The system will only
playback messages for
four minutes and then it
returns to command
waiting mode. To
continue playing your
message, press # then
22
again within 15 seconds.
CCoommmmaanndd FFuunnccttiioonn
# then
11
Repeat a message
# then
22
Playing your messages
# then
33
Skipping a message
# then
44
Deleting a message
# then
55
Stop message playback
# then
66
Answering system on
# then
77
Voice memo record/stop (up to 4 minutes recording time)
# then
88
Greeting message record/stop
# then
99
Answer system off
# then
*
Room monitor
THE INTEGRATED ANSWERING DEVICE
TRU3485_new 8/7/00 5:23 PM Page 45