GETTING STARTED [ 7 ]
GETTING STARTED
• You should charge your handset at least 15 hours before using the phone.
• The location should be close to both a phone jack and a continuous power outlet which is
not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The base can be placed on a desk, tabletop or mounted on a standard wall plate.
Connect the base unit
If you want to install the base unit on the
wall, see page 9
1 Connect the telephone line cord to the
TEL LINE jack and to a telephone outlet.
2 Connect the AC adapter to the
DC IN 9V
jack and to a standard 120V AC
wall outlet.
3 Set the base unit on a desk or tabletop and place
the handset on the base unit.
Then raise the antenna to a vertical position.
Place the power
cord so it does not
create a trip hazard
or where it could
become chafed and
create a fire or
electrical hazard.
TRU246_2.4GHz Owners Manual 7/26/00 9:33 Page 7