Filter
Top Products
[ 8 ] GETTING STARTED
Choose the dialing mode
Depending on your dialing system, set the PULSE-TONE
switch as follows:
If you aren’t sure of your dialing system
Make a trial call with the PULSE-TONE switch set to
TONE.
If the call connects, leave the switch as is; otherwise, set to
PULSE.
Use only the supplied AD-311 AC adapter. Do not use any other AC adapter.
Connect the AC adapter to a continuous power supply.
Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
If your telephone outlet isn’t modular, contact your telephone company for assistance.
Modular
If your dialing system is Set the switch to
Tone TONE
Pulse PULSE
TRU246_2.4GHz Owners Manual 7/26/00 9:33 Page 8