Filter
Top Products
[ 10 ] GETTING STARTED
Direct wall plate mounting
If you don’t have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into
the wall.
• Try to mount your phone within 10 - 15 feet of a working phone
jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of
the base and handset.
•Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will be
placed.
1 Insert two mounting screws into the wall, (with their appropriate
anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch
between the wall and screwheads for mounting the phone.
2 Refer to steps 1 through 9 on page 9 to mount the telephone.
TRU246_2.4GHz Owners Manual 7/26/00 9:33 Page 10