Filter
Top Products
[ 9 ]
GETTING STARTED
GETTING STARTED
The plastic connectors will
fit together only one way.
Make sure the battery´s
connector is properly
aligned.
BB.. IInnssttaalllliinngg tthhee HHaannddsseett BBaatttteerryy PPaacckk
CChhaarrggee tthhee bbaatttteerryy ppaacckk ffoorr 1155--2200 hhoouurrss bbeeffoorree
pplluuggggiinngg tthhee pphhoonnee lliinnee iinnttoo yyoouurr pphhoonnee..
11
Press in on the battery cover release and slide the
cover down until it comes off.
22
Connect the battery pack connector with the
correct polarity (black and red wires), then insert
the battery pack into the battery compartment.
33
Slide the battery cover forward until it snaps
into place.
44
Place the handset on the base.
55
Make sure that the “
ssttaattuuss
“ LED lights. If the LED
doesn´t light, check to see that the AC adapter is
plugged in and that the handset makes good
contact with the base charging contacts.
Use only the Uniden Battery (BT-800) supplied with
your phone. Replacement batteries are also available
through the Uniden Parts Department (See page 7).
EXT1365_ENG 6/6/01 4:35 PM Page 9