Filter
Top Products
43
Additional information
(continued)
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1 Snap the wall mount adapter into the
notches on the base.
2 Plug the telephone line cord to the
TEL LINE jack and the AC adapter to
the
DC IN 9V jack.
3 Plug the telephone line cord into the
telephone outlet.
4 Wrap the AC adapter cord inside the
molded wiring channel. Then wrap
the cord around the strain relief notch.
5 Plug the AC adapter into a standard
120VAC wall outlet.
6 Raise the antenna to a vertical
position.
7 Align the mounting slots on the base.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
1
AC adapter
Wall plate
AC outlet
2, 3, 4,
5, 6, 7
Note
Use only the Uniden AC adapter supplied
with this phone.
EXI 8965 5th 99.8.20 2:11 PM Page 46