Filter
Top Products
11
Making calls
Making a call with the handset
[On-hook dialing]
1 Pick up the handset and dial the
phone number. (Phone numbers can
be up to 32 digits.)
Example: Enter 8178583300
2 Press . “Talk” flashes on the
display.
Then the volume setting is displayed.
Example:
High setting
3 The number is dialed. After about 5
seconds, the call-time display appears.
select/ch
redial/p
ª
•
/tone/
0
*
8178583300
Talk
8178583300
Talk 0:00
8178583300
talk
4 Press or place the handset on the base
to end the telephone call. The call-time displays
for about 5 seconds.
5:15
talk
Other Operations
To Do this
To improve reception Press .
To adjust the ear speaker volume Press or .
To temporarily switch to tone dial Press . The following numbers
(When base is set to pulse mode.) dialed will be sent as tone dialing.
To enter a pause within the numbers dialed Press .
select/ch
ª
•
/tone/
0
*
redial/p
Notes
• If you enter a wrong number at the step 1, you can edit the number by , and
move the cursor by or .
• If there is no key entry for more than 20 seconds, the dialing operation is canceled
and the telephone returns to the standby mode.
• The phone number can be changed before pressing .
talk
Talk
<High>
del
/tone/
0
*
#/
1
EXI 8965 5th 99.8.20 2:09 PM Page 14