Filter
Top Products
8
Step 3
Preparing the battery pack
Charge the battery pack for more than 12-15 hours before you start using your phone.
1 Press and slide the battery compart-
ment cover toward the bottom of the
unit.
2 Connect the battery pack connector
with the correct polarity (black and red
wires), then insert the battery pack
into the battery compartment.
3 Securely close the battery compart-
ment cover by sliding it up until it
snaps into place.
4 Place the handset on the base unit
with the keys and display facing
upward.
This position lets you see Caller ID
messages on the display.
When the handset has been properly
placed on the charging terminals of
the base unit, the “
status
” lamp of
the base unit lights and charging
begins. Charge the battery for at least
12-15 hours.
You can place either side up for charg-
ing the battery.
Red
status
lamp
Black
Total:00
EXI 8965 5th 99.8.20 2:09 PM Page 11