Filter
Top Products
GETTING STARTED [ 7]
• Even when the
battery pack is
not being used,
it will gradually
discharge over
a long period
of time. For
optimum
performance,
be sure to
return the
handset to the
base unit after
a telephone
call.
• If you must
replace the
battery pack
during a
telephone call,
complete the
replacement of
the battery
pack within
30 seconds,
and you can
return to the
original call.
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not in
use, ¨
Low Battery¨ appears on the LCD and none of the keys will operate.
If the phone is in use, ¨
Low Battery¨ flashes and the handset beeps. Complete
your conversation as quickly as possible and return the handset to the base unit
for charging.
Cleaning the Battery Charging Contacts
To maintain a good charge, it is important to clean the battery contacts
on the handset and base unit with a dry cloth or a pencil eraser about
once month. Do not use any liquids or solvents.
The last number dialed in the redial memory, the names and the numbers stored
in the memory locations are retained for up to 30 minutes while you replace the
battery pack.
contacts
C. Connect the base unit
1)Connect the AC adapter to the DC IN 9V jack and to a standard
120V AC wall outlet.
GETTING STARTED
2960_eng combined.qxd 1/22/01 11:50 AM Page 7