Filter
Top Products
Answering System Setup
Turning the Answering System On/Off
1.
To turn the Answering System on, press
answer
.
A tone sounds, and the current outgoing message plays
on the Base Unit speaker. A second tone sounds to
indicate the unit is ready to answer calls, and the
Message Counter LED turns on.
2. To turn the Answering System off, press
answer
again.
A tone sounds and the Message Counter LED turns off.
Setting the Clock and PIN Code
The clock in your
DXAI685
Answering System starts when power is applied to the Base Unit. You can also set
a personal two-digit code (00 to 99) for your
PIN
code. You must use your
PIN
code to access your Answering
System from a touch-tone telephone.
1. Press
caller id
on the Handset.
2. Press
flash/function
on the Handset.
3. Enter the number which corresponds to the day.
4. Enter the two-digit number for the hour (01-12) and the minute (00-59).
5.
To set AM, press
8
on the Handset.
To set PM, press
# on the Handset.
42