Filter
Top Products
16
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
Try to mount your phone within 1.5m of a working phone jack to avoid excessive
wire lengths.
Make sure the wall material is capable of supporting the weight of the base and
handset.
Use #10 screws with a minimum length of 35mm, with anchoring devices suitable
for the wall material where the base unit will be placed.
Insert two mounting screws into the wall, using the appropriate anchoring device,
100mm apart. Allow about 3mm between the wall and screw heads for mounting
the phone.
Refer to the steps on page 15 to complete the mounting process.
•
•
•
•
1)
2)
TOP
3mm
100mm
35mm
TOP
3mm
100mm
35mm