Filter
Top Products
Symptom Suggestion
The handset doesn't
communicate with other
handsets.
An extra handset can't join the
conversation.
Room Monitor does not work.
The answering system does
not work.
Time stamp cannot be heard.
Messages are incomplete.
There is no sound on the
base or handset speaker
during call monitoring or
message review.
Cannot access answering
system from a remote phone.
• Change the Digital Security Code (see on page 61).
• Make sure that you have registered all handsets (see on
page 20).
• Make sure there are not two handsets already using the conference feature.
• Make sure that another handset is not in privacy mode.
• Make sure to place the handset(s) within the range of the base.
• Make sure the base is plugged in.
• Make sure that the answering system is turned on.
• Make sure you have set the time (see on page 17).
• Make sure that the message record time is not set to announce only.
• Incoming messages may be too long. Ask callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
• Adjust the speaker volume on the base or handset.
• Make sure the call screen feature is set to on.
• Make sure you are using the correct PIN number.
• Make sure that the touch-tone phone you're using can transmit the tone for at least two
seconds. If it cannot, try using a different touchtone phone.
Changing the Digital Security Code
Registering Accessory Handsets
Setting the Day and Time
[63]