Filter
Top Products
press to insert a two-second pause. You can also use more than one pause together if two
seconds is not long enough. Each pause counts as one digit.
3. Press again, and then press the number key ( to ) where you want to store this phone
number. You will hear a confirmation tone.
1. With the phone in standby, press twice.
2. Press the number key ( to ) that contains the phone number you want to delete. You will hear a
confirmation tone.
Each handset will display a banner name once it is registered to the base. The default banner is Handset #1,
Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more
than one handset, the banner name identifies your handset during handset-to-handset functions like intercom and
DirectLink communication. The name will be displayed on the LCD screen during Standby, Intercom, Intercom
Hold, Room/Baby Monitor, and Copy Phonebook operations. The banner name will be displayed on the receiving
handset as well.
1. Press .
2. Select the HANDSET SETUP menu, and then the BANNER submenu.
3. Use the keypad to enter or edit the banner name. (See
on page 12 for detailed instructions on entering text.)
4. Press . You will hear a confirmation tone.
[redial/pause]
[memory] [0] [9]
[memory]
[0] [9]
Changing the Handset Banner
[menu/clear]
[select/ ]
Deleting Base Speed Dial Numbers
Customizing Your Phone
Entering Text
from Your Handset
[27]