Uniden DECT 1811 Telephone User Manual


 
14
USER NAME
You can programme your handset to display your name (up to a maximum of 10
letters). Look at this example for the user name FRED first.
press
[menu] key once and then press [*]
three times to reach the USER NAME
display on the LCD.
press
[OK] key to choose this menu item.
NAME? will be displayed.
to key in the name FRED the following
keys are pressed.
press
[3] three times until [F] is displayed.
press
[7] three times until [R] is displayed.
press
[3] twice until [E] is displayed.
press
# key to make it possible to key in another letter from the same
numerical key.
press
[3] once and [D] will be displayed.
press
[OK] key to confirm the user name and escape menu.
FRED 1 will now appear on the LCD when power is switched on.
Follow the above example to key in your own user name and press
[OK] to confirm.
DIRECT CALL
The direct call option on your handset can be used to dial a specific number which
you have saved, no matter what key is pressed. This feature provides easy one touch
any key dial access to call a relative or emergency service. Only one direct call
number can be programmed for each handset and only for external outgoing calls.
press
[menu] key until you reach the
DIRECT CALL display on the LCD.
press
[OK] key to choose this menu item.
PHONE NUMBER will be displayed.
insert the direct call phone number you
have chosen.
press
[OK] key to confirm.
to exit from this menu option, press the
[clr] key twice in quick succession.
Leaving your handset in direct call mode
Leave your handset in the direct call mode when you want to have the option of
dialling the programmed direct call number using any one key on the handset.
press
[menu] key until you reach the
DIRECT CALL display on the LCD.
press
[OK] key twice.
your handset is now in direct call mode.