Filter
Top Products
8
MAKING EXTERNAL CALLS
There are several ways to make an external call using your DECT 1811 phone.
1. Press talk
[] key on the handset. Enter the number you require and you
will be connected automatically.
2. Enter the number you require. The number will appear on the LCD but won't
be dialled. You can edit the number by using the
[clr] key. Press talk []
to dial the number entered.
3. Press
[OK] to call a number stored in your phone book.
4. You can use the
[rdl/p] key if the number you wish to dial is one of the last three
dialled numbers which are stored in the redial memory. Press [rdl/p] until you
reach the number you wish to redial. Press talk []to dial the number.
MAKING INTERNAL CALLS
Make an internal call to another handset by pressing the [int] key followed by the
number of the handset. Press the talk []key to end an internal call.
ENDING CALLS
Press talk []to end a call.
RECEIVING INCOMING CALLS
1. If the handset rings when it is off the base unit, press talk []to answer
the call.
2. If the handset rings when it is on the base unit, simply lift the handset from
the base unit and speak using the AUTO TALK feature. It is not necessary to
press the
[TALK] [ ] key.
CALL DURATION
The length of your call will be displayed at the left of the LCD after the call has
lasted for 10 seconds. When the call has ended, call duration will be displayed for
a further 2 seconds.
MUTE
During a call, you can mute your voice so the caller cannot hear you. To do this,
press and hold the [clr] key. To unmute, press and hold the [clr] key again.
FINDING THE HANDSET
If you misplace the handset, press the [PAGE] key on the base unit. The handset will
ring 8 times and this should help you locate it. To stop the ringing once the handset
has been found, either replace the handset on the base unit or press talk [].
USING YOUR PHONE