Uniden DECT1480 Cordless Telephone User Manual


 
21
If… Try…
The system won't
record messages.
Making sure the
Record Time
is not set to
Announce Only
.
Deleting messages (memory may be full).
-
-
A handset can't access
the answering system.
Seeing if another handset is using the system.
Making sure the phone is in standby.
-
-
My outgoing message
is gone.
If there was a power failure, you may
have to re-record your personal outgoing
message.
-
I can’t hear the base
speaker.
Making sure call screening is turned on.
Changing the base speaker volume.
-
-
Messages are
incomplete.
The incoming messages may be too long.
Remind callers to leave a brief message.
Deleting messages (memory may be full).
-
-
When I answer on an
extension, the phone
keeps ringing (or
keeps recording.)
You may have to change the line mode.
Contact Customer Service for instructions
-
Weak or Hard To Hear Audio
If a caller’s voice sounds weak or
soft, the signal might be blocked
by large metal objects or walls;
you might also be too far from
the base, or the handset’s battery
may be weak.
Try moving around while
you’re on a call or moving
closer to the base to see if the
sound gets louder.
Make sure the handset’s
battery is fully charged.
Try adjusting the earpiece
volume.

If you have a hearing aid equipped
with a telecoil (T-coil) feature, the
interacon between the hearing aid
& digital cordless phones can cause
noise in the handset. If you have a T-
coil hearing aid & you have problems
with noise on the line, try turning on
T-coil
mode. Open the menu. Select
Handset Setup,
then select
T-coil
.
Using T-coil mode can shorten the
handset’s talk me; make sure to
watch the baery status and keep
the baery charged.

If you have a hearing aid equipped
with a telecoil (T-coil) feature, the
interacon between the hearing aid
& digital cordless phones can cause
noise in the handset. If you have a T-
coil hearing aid & you have problems
with noise on the line, try turning on
T-coil
mode. Open the menu. Select
Handset Setup,
then select
T-coil
.
Using T-coil mode can shorten the
handset’s talk me; make sure to
watch the baery status and keep
the baery charged.