Uniden D3580-2 Cordless Telephone User Manual


 
16 - English
To... Press...
put an outside line call
on hold and make an
intercom call
MENu/sElECT
and select
Hold/Transfer
from the
off-hook menus. Select the handset you want
to talk with, or
All
to page all handsets at the
same time.
end an intercom call
END/ClEaR
. Both handsets return to standby.
Silent Mode
Youcansilencetheringersonthebaseandallhandsetsforaspecific
periodoftime;theansweringsystemanswersanyincomingcallswithout
playinganythingthroughthespeaker.
1. Withthephoneinstandby,pressandhold
#
onanyhandset.Thephone
promptsyoutoselectthenumberofhours(
1
-
9
or
Always On
)thatyou
wantittostayinsilentmode.
2. Toconfirm,press
#
orjustwaitabout5seconds.Thephoneturnsonthe
answeringsystemanddisplays
Silent Mode On
oneachhandset.
3. Aftertheselectednumberofhours,thephoneautomaticallyexitssilent
mode.Toexitsilentmodemanually,pressandhold
#
again.
# If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode.
Multihandset Features
# To use the features in this section, you need at least 2 handsets.
• Yourbasesupportsatotalof12cordlesshandsets:theonethatcame
withthebaseandupto11DCX170BTaccessoryhandsets.Yourbase
alsosupportsatotalof2DRX100rangeextenders,includinganythat
camewithyourphone.
• Youmustregisteraccessoryhandsetstothebasebeforeusingthem.
(Handsetsthatcamepackagedwiththebasearealreadyregistered.)
• Handsetsthataren’tregistereddisplayaNot Registeredmessage.
Forregistrationinstructions,seepage23,orseetheaccessoryhandset
manual.
• Ifahandsetwaseverregisteredtoabase,youmustresetitbeforeitcan
registertoanewbase;seepage23,orseetheaccessoryhandsetmanual.
Conference Calling
• Whenanoutsidecallcomesin,twohandsetsandonecellphonecan
joininaconferencecallwiththeoutsidecaller.