Uniden CT301 Cordless Telephone User Manual


 
Care & Mai ntenance
Troubleshooti ng
If your CT301 Cordless Telephone is not perform-
ing up to your expectations, please try these
simple steps. If you are still unable to resolve the
problems, contact Uniden Customer Service at:
Australia(02)559-3100,NewZealand(09)273-8383,
during business hours, Monday through Friday.
The battery charge contacts on the Base Unit and
Handset should be cleaned once a month with a
clean dry cloth to ensure consistent trouble free
battery charging.
If the TALK button is not working, make sure that
the Base Unit AC power cord is plugged into the
wall outlet. Next, make sure that the battery pack
is properly installed in the Handset. If the AC
Power is properly applied to the CT301, your
battery may be Iow. To confirm this, put the
Handset back in the cradle. Then lift it up again
and press the TALK button. If the BATT La LED
flashes,the battery needs to be recharged. Simply
put the Handset in the cradle for 12 to 16 hours.
The Handset is automatically recharged whenever
it's put in the cradle. However, it can lose its
charge if:
1. The Handset wasn't charge initially for the
required 12 to 16 hours.
2. The AC power cord becomes disconnected
from the wall outlet or the Base Unit.
3. The Ni-Cd battery pack is disconnected.
4. Electrical service to your home was
discontinued (storms, vacation, etc.).
If any of these situations occur, recharge.
- 14-
-- -- -
- ~ ---~- --'----
-