Filter
Top Products
3. Place the battery pack into the
battery compartment.
4. Replace the cover by sliding it
on. Make sure not to get the wires from the
battery pack caught in the cover.
Charging the Battery Pack
The rechargeable Ni-Cd battery pack included
with your CT301 needs to be charged for approxi-
mately 12-16 hours before first use. Place the
Handset in the cradle, and the CHARGE LED
should light, indicating the battery pack is being
charged. After 12-16 hours, your CT301 will be
ready to use.
CAUTION
If the unit is to be left unused for a longperiod
of time, remove the batteries. Theyshould be
reinserted and fully charged every 3 months.
Selecting Tone or Pulse Dialing
(Australian Model only)
You must set the TIP (Tone/Pulse) switch on the
rear side of the Base Unit to the proper setting. If
you do not know what type of dialing your tel-
ephone system provides, call your local telephone
company for the information.
Secu rity Code
When you first place the Handset on the Base
Unit to charge the battery pack, the Security Code
is automatically set to one of 65,536 codes.
To reset the Security Code, remove the battery
pack from the Handset for more than one minute.
Then reinstallthe battery pack and return the
Handsetto the Base Unit. The Security Code will
automatically be set to a different Security Code.
-11-
~ .- -' - -- - ~