48
If you experience difficulty while in TrunkTracker™ mode, try the following steps.
Scan won’t start.
(continued)
The antenna might need
to be adjusted.
Check the antenna
connection.
Weather scan doesn’t
work.
The squelch might need to
be adjusted.
Adjust the squelch
threshold. See “Setting the
Squelch” on Page 20.
The antenna might need
to be adjusted.
Check the antenna
connection.
Problem Possible Cause Suggestion
Scanner won’t track a
trunked system.
The system might not be
one your scanner can
scan.
Scan another system.
The data frequency might
be missing.
Enter the data frequency.
The scanner might need
to be changed to a Type 1
scanner setup.
Change to a Type 1
scanner setup. Review
“Programming Motorola
Systems” on Page 41.
The system you are trying
to scan might be LTR or
EDACS.
Set the scanner to scan
LTR or EDACS systems.
Review “Programming
EDACS Systems” on
Page 44 and
“Programming LTR
Systems” on Page 45.
Scanner won’t stop
scanning during Scan List
mode.
No ID’s have been
programmed.
Program one or more ID’s.
The ID’s you have stored
are not active.
Wait for the ID’s to
become active or scan
another system.
Scanner won’t acquire the
data channel.
The squelch might need to
be adjusted.
Adjust the squelch
threshold. See “Setting
the Squelch” on Page 20.
The frequency used for
the data channel might be
missing.
Check your frequency list
for the data channel.
Missing replies to
conversations.
The scanner might need
to be changed to a Type 1
scanner setup.
Change to a Type 1
scanner setup. Review
“Programming Motorola
Systems” on Page 41.
. The fleet map might be
incorrect.
Try another preset fleet
map or program your own
fleet map.