Uniden BC898T Telephone User Manual


 
34
1. Hold down WX for about 2 seconds to turn on weather alert.
2. Hold down E for about 2 seconds.
If the scanner has not been set to alert for any FIPS code,
____
appears. If the scanner
is set to alert for all FIPS codes,
ALLFIPS appears. If the scanner is set to alert only for
the area you programmed, F1
appears.
3. Turn the rotary tuner or repeatedly press HOLD U or LIMIT V to enter a FIPS code
(1 through 15). Then enter the FIPS code and press E.
To set the scanner so it sounds an alert tone when it receives any FIPS code, turn the
rotary tuner or repeatedly press HOLD U or LIMIT V to move ALLFIPS to F1. To set
the scanner so it sounds an alert tone when it receives only one of the FIPS codes you
programmed, turn the rotary tuner or repeatedly press HOLD U or LIMIT V to select
F1
to F15. Then press E.
4. When you finish entering FIPS codes, press E.