Uniden ANA9320 Cordless Telephone User Manual


 
PBX Features
L1
Key
Press the
L1
key to initiate a call on Line 1.
L2
Key
Press the
L2
key to initiate a call on Line 2.
conf
Key
In PBX mode, the
conf
(conference) key must first be programmed.
Refer to the section entitled "Programming Conf in PBX".
xfer
Key
Press
xfer
(transfer).
Dial the target number.
When the receiving party answers, press
xfer
to complete the call.
Note: This feature is only available in PBX mode.
hold
Key
Press once and the call is placed on hold.
Press
L1
,
L2
or
TALK
to resume the call.
pause
Key
In PBX mode, the
pause
key is used to program the
xfer
and
conf
feature buttons. Refer to the sections entitled "Programming xfer in
PBX" and "Programming Conf in PBX".
flash
Key
Press once to cause a "Hook Flash" while on a call.
In standby mode, you can redial any one of the last three numbers
previously dialed.
ON/OFF MUTE
Key
This key turns the handset MIC on or off while in TALK mode.
It toggles between on and off.
28
36
Y:...ANA9320 om.vp
Tue Dec 03 15:25:12 2002
Color profile: Disabled
Composite Default screen