Uniden ANA9320 Cordless Telephone User Manual


 
Charging the Handset Battery Pack
The Rechargeable Ni-MH Battery Pack must be fully charged before
using your ANA 9320 for the first time.
(
Note: Charge the Battery Pack without interruption for 5 hours.
)
1. Place the Handset into the
Charging Unit.
2. Make sure the CHARGE indicator
illuminates. If the CHARGE light
doesn’t illuminate, check to see
that the AC Adapter is plugged in,
and that the Handset is making
good contact with the Charging
Unit charging contacts.
Low Battery Indicator
When the Battery Pack in the
Handset is low and needs to be
charged, you will see a message
on the display.
On a Call In Standby Mode
All keys and functions are available. None of the buttons operate.
Handset beeps once every 3 seconds Handset beeps every 15 seconds for
3 minutes.
Complete your call as quickly as possible Cannot make call nor receive a call.
Replace Battery pack within 20 seconds
to continue call.
Replace Battery Pack before making
a call.
Return the Handset to the Charging Unit for charging.
Cleaning Charging Unit Contacts
To maintain a good charge, it is important to clean all charging
contacts on the Handset, and Charging Unit about once a month.
Use a pencil eraser or other contact cleaner. Do not use any liquids
or solvents.
18
26
Y:...ANA9320 om.vp
Tue Dec 03 15:23:41 2002
Color profile: Disabled
Composite Default screen