Filter
Top Products
Programming Xfer in PBX
Note: Before programming these commands, contact your
PBX Administrator to obtain programming codes.
The
xfer
key can be programmed for special use, such as causing
a "Hook Flash" followed by a special number or function.
The Hook Flash is used to send a signal to the PBX system to
initiate a transfer.
For example - to program
xfer
for "Hook Flash" and
9
for outside
transfers only:
Press and hold
pause
for two seconds.
The talk icon blinks.
Press
flash
.
Press
9
.
Press
xfer
.
Press
xfer
.
For the ANA 9320, the transfer key is operated by the Hook-Flash
function. Program your system transfer code with the assistance of
the PBX System Administrator.
25
33
Y:...UC790B_2(ANA9320) OM.vp
Tue Dec 03 18:41:06 2002
Color profile: Disabled
Composite Default screen