Filter
Top Products
11
12
Installing the Phone
Expanding Your Phone
Adding accessory handsets
Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now
place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.
Your phone is compatible with the following Uniden DECT accessory handsets: DECT Elite 9005 and DECT 6005.
(Please visit our website at www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand
models for the most up-to-date list of compatible handsets.)
For instructions on connecting the charging cradle, see page 7.
If you purchase any accessory handsets separately, you must register the handsets to the base before you can
use them. (Accessory handsets that come packaged with a base are already registered to that base.)
Registering accessory handsets
When charged, registered handsets display a handset ID number.
Handsets that have not been registered display as shown.
To register a DECT Elite 9005 accessory handset:
Charge the handset for 15-20 hours.
Place the handset in the base cradle for about thirty seconds. HANDSET
REGISTERING will appear in the LCD.
When the handset has registered to the base, the LCD will display
REGISTRATION COMPLETE then show the handset ID number.
If the display shows REGISTRATION FAILED, repeat the process again.
To register a DECT 6005 accessory handset:
Charge the handset for 15-20 hours.
Disconnect the base AC adapter. Then press and hold [nd] while you reconnect the adapter. Keep pressing
[nd] until the charge LED starts to blink.
On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.
•
•
•
1)
2)
3)
1)
2)
3)
Handset not
registered-place
handset on base
to register.
See your Owner's
Manual for help.
Handset not
registered-place
handset on base
to register.
See your Owner's
Manual for help.
DECT ELITE OM.indb 12 13/3/08 3:17:49 PM