Uniden 2.4 Cordless Telephone User Manual


 
[50] EXPANDING YOUR PHONE
www.uniden.com
Register the Handset to the Base
If you purchase an extra handset, you need to register the handset to the base before
use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned at
the factory, which has #1 or #2 in the display (#2 for
models that have two handsets in packaging). When you
register additional handset to the base, the handset ID will
be assigned.
1) Before registering the extra handset,
the battery pack must be charged for
15-20 hours.
2) Place the extra handset in the main base unit
to begin registration.
3) While the handset is registering,
Handset
Registering
will appear in the LCD.
When
Registration Complete
is displayed,
the handset has been registered to the base.
If
Registration Failed
appears, please try
these steps again.
2NCEGJCPFUGV
QPOCKPDCUG
VQTGIKUVGT
4GIKUVTCVKQP
%QORNGVG
Extra Handset
Extra Handset
Charger
Charger
Main Base
Extra Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the extra
handset in the main
base to register.
1
2
3
4
•An extra handset can
be registered when
the main base is in
standby mode.
Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
note