Toshiba Strata IPT Telephone User Manual


 
The Basics
Important - Read First
12 Strata CIX and CTX IPT/DKT Telephone 11/05
Which Outgoing/Incoming Call Features Do I Have?
Check mark here which outgoing/incoming features you have on your system.
Automatic Line Selection (ALS): When making outgoing calls, you have ALS if
when you lift the handset or press
Spkr you hear dial tone and the Line Light
Emitting Diode (LED) lights steady green. The LCD displays the station number
and the seized outside line.
Ringing Line Preference: You answer an incoming line ringing your station by
lifting the handset or pressing
Spkr. You do not have to press an extension button
to answer.
Tone First Signaling: Internal incoming call – you hear successive ring tones,
then lift the handset or press
Spkr to answer the call.
Note Check with your System Administrator to see if you are set with Tone First
Signaling. If you do, you can press
2 to change to Voice First signaling.
Voice First Signaling: Internal incoming call – your telephone does not ring;
instead you hear a long tone, then the caller’s voice. Talk in the direction of your
telephone, or answer the call as you normally would by lifting the handset or
pressing
Spkr.
Note Check with your System Administrator to see if you have the ability to change
between Tone and Voice Signaling on a call-by-call basis. If you do, you can
press
1 after dialing an internal telephone number to change the signaling.
Hot Dialing: If your telephone is programmed for “hot dialing,” you do not have
to press
Spkr or lift the handset before dialing internal or external speakerphone
calls. When you dial a number, the speakerphone automatically turns on and the
Spkr and Mic LEDs light.