Filter
Top Products
Introduction
User's Manual vii
TOSHIBA Pocket PC e310 Version
1
Last Saved on 15/03/2002 14:34
ENGLISH using Euro_C.dot Printed on 15/03/2002 as PDA2_UK
■ Do not disassemble, remodel, or repair.
Disassembly, remodeling, or repair can cause fire, electric shock, or
injury.
Please contact the dealer from whom the pocket PC was purchased
and request repair service.
CAUTIONS
■ When unplugging the power plug from the outlet, disconnect the
power cord by grasping the power plug itself.
Pulling out the power cord by grasping the cable can cause ignition or
electric shock due to cable damage.
■ When handling the power cord, observe the following rules.
■ Do not damage the power cord.
■ Do not tamper with the power cord.
■ Do not twist the power cord.
■ Do not forcibly bend the power cord.
■ Do not pull the power cord.
■ Do not overload the power cord.
■ Do not heat the power cord.
■ Do not place it close to heating apparatus.
Failure to do so can cause fire or electric shock.
If you find that the power cord is damaged, please call the dealer from
whom the pocket PC was purchased and purchase a new power
cord.
■ Do not connect terminals (metallic parts) with metallic objects, such as
wires.
Connecting the terminals (metallic parts) with metallic objects can
cause heat generation or burns.
■ Keep the pocket PC out of the reach of infants.
Placing within the reach of infants can cause injury.
NOTES
■ Use the pocket PC only in locations with the following ambient
environmental conditions.
When operatingTemperature 0°C to 40°C, Humidity 30% to 80%
When charging Temperature 5°C to 35°C
■ Do not use or store the Pocket PC in the following locations.
■ Locations subject to extremely high or low temperatures
■ Dusty locations
■ Locations subject to strong vibration
Usage or storage in such locations can cause failure, malfunction, or
loss of stored data.