Toshiba DKT Telephone User Manual


 
User Programming
Feature Codes
Strata CTX DKT/IPT Telephone 10/03 77
Speed Dial (Storing an SD number)
Station
2
+ + Phone No.
3
+
nnn = 100~199 SD bin numbers
System
2
+ + Phone No.
3
+
nnn = 200~999 SD bin numbers
Speed Dial (Dialing a stored SD number)
Station
2
4
+
nnn = 100~199 Station SD bin numbers
System
2
4
+
nnn = 200~999 System SD bin numbers
Start Application
Travelling Class Override
Enter Code
, then dial number (enter LCR code if required)
Change Code
+ Index Number + old Code + + new Code +
User Programming Mode
Voice Mail (VM)
Direct Transfer to Voice Mail
While on a call, press + . Dial VM mailbox
number (usually Ext. Number) +
.
Volume Control - Beep
With handset off-hook, press . Press or .
Volume Control - Ringing
With handset on-hook, press . Press or .
1. If you have hot dialing, you do not need to press Ext. button as part of the sequence.
2. Stations must be assigned/enabled SD capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
3. Refer to Table 7 on page 54 to see how to enter
and into a speed dial number.
4. If your telephone does not have a
button, press the
button, then dial the three digit Speed
Dial bin number (nnn).
Table 13 Feature Access Codes (continued)
Feature
Feature Access Code Sequences
1