Filter
Top Products
Advanced Operation
Off-hook Call Announce
46 Strata CTX DKT/IPT Telephone 10/03
Off-hook Call Announce
Off-hook Call Announce (OCA) enables you to complete a call to a busy digital
telephone. Your telephone must be programmed to either announce automatically or to
announce after you press a button on your dial pad. The destination telephone must be
programmed to accept an OCA. The announcement may be delivered over the handset
or the speaker.
Handset OCA Announce can operate on any digital telephone. Speaker OCA requires
the addition of a special circuit board inside the DKT speakerphone.
➤ To make an OCA call
➤ Manual – Dial an extension. When you hear busy tone, press and, after one long
tone, you can talk through the speaker of the destination telephone. The person you
are calling has answering options described below.
➤ Automatic – If your telephone and the extension you are calling have been
programmed for Automatic OCA, you can talk through the speaker of the
destination telephone without hearing the busy tone and without dialing
.
➤ To answer a Handset OCA call
While you have a call in progress, you hear one tone in your handset to indicate that a
second station is calling.
➤ Press 0LF to toggle between the new and original callers.
You talk to the new caller for as long as you hold down
0LF. When you release the
button, you return to the original caller. In both cases, neither caller can hear the
other. Your LCD indicates which station or CO line you are connected to.
➤ To answer a Speaker OCA call
Note This feature is not available on the IPT1020-SD telephone.
1. While you have a handset call in progress and you hear one tone, this indicates that
a second station is calling. The second caller connects to the speaker in your
telephone. The Spkr LED flashes and the Mic LED lights. You will be speaking to
the first caller through your handset and the second caller through the microphone.
2. To turn off your microphone speaker to the second party, you can press
0LF or
0LFURSKQ&XWRII; the Mic LED turns Off. You will no longer be talking to the
second caller, although he/she can still speak through your speaker.