Filter
Top Products
The Basics
Important - Read First
8 Strata CTX DKT/IPT Telephone 10/03
Which Outgoing/Incoming Call Features Do I Have?
Check mark here which outgoing/incoming features you have on your system.
❐ Automatic Line Selection (ALS): When making outgoing calls, you have ALS if
when you lift the handset or press
6SNU you hear dial tone and the Line Light
Emitting Diode (LED) lights steady green. The LCD displays the station number
and the seized outside line.
❐ Ringing Line Preference: You answer an incoming line ringing your station by
lifting the handset or pressing
6SNU. You do not have to press an extension button
to answer.
❐ Tone Signaling: Internal incoming call – you hear successive ring tones, then lift
the handset or press
6SNU to answer the call.
❐ Voice First Signaling: Internal incoming call – your telephone does not ring;
instead you hear a long tone, then the caller’s voice. Talk in the direction of your
telephone, or answer the call as you normally would by lifting the handset or
pressing
6SNU.
❐ Switching Signaling: Check with your CTX System Administrator to see if you
have the ability to change between Tone and Voice Signaling on a call-by-call
basis. If you do, you can press
after dialing an internal telephone number to
change the signaling.
❐ Hot Dialing: If your telephone is programmed for “hot dialing,” you do not have
to press
6SNU or lift the handset before dialing internal or external speakerphone
calls. When you dial a number, the speakerphone automatically turns on and the
Spkr and Mic LEDs light.