Filter
Top Products
Advanced Operation
Paging
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02 33
Class of Service Override
By dialing a Class of Service Override code, a user can change a station’s set of
privileges to one associated with the override code. When the call is terminated and
another is attempted from the same station, the original Class of Service is applied.
This allows selected users to override restrictions that are placed on any telephone in
the system.
➤ To perform Class of Service Override
1. Access an outside line. You hear dial tone.
2. Press
)ODVK + . Dial tone stops.
3. Enter the Class of Service Override Code (four digits). You hear dial tone. For
security reasons, the override codes are only available on a selected basis. See your
CTX System Administrator.
4. Dial a telephone number.
Privacy Override
This feature enables you to enter an established call on a line you share with another
telephone. Up to two station users can enter an existing CO line-to-station call (i.e., up
to three stations can be connected to a CO line). You can also use this feature if the
station that is already connected to the CO line is in the Privacy Release mode.
Station users with
3ULYDF\5HOHDVH can allow stations with the shared button
appearance to enter their conversations, even if the station entering the conversation is
not programmed for Privacy Override. (see “Privacy” on page 35.)
Paging
Station users can make page announcements to telephones and external speakers.
Check with your CTX System Administrator to find out the zone numbers for various
paging groups.
➤ To make a Page Announcement to a phones or external speakers
1. Dial a paging access code.
2. Make your announcement, then hang up.