Filter
Top Products
The Basics
Call Transfer
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02 9
Call Transfer
1. While on a call, press &QI7UQ. Your Line LED flashes green and you hear internal
dial tone.
2. Dial the extension to which the call will be transferred. You can remain on the line
and announce the call or immediately “blind transfer” the call.
During call transfer, you can connect all three parties by pressing your flashing
extension button or
&QI7UQ.
• If you get voice mail, you can leave a message or hang up and let the
transferred caller leave a message.
• If you hear a long single tone, then announce the call over the called phone’s
speaker.
3. Transfer with Camp On: If the station to which you want to transfer the call is
busy, you may hang up and the transferred trunk or station will be camped on to the
busy destination.
➤ To transfer a call directly to Voice Mail (VM)
1. While on a call, press
&QI7UQ.
2. Enter
.
3. Enter the VM mailbox number (usually the same as the extension number).
4. Hang up (the caller is connected to the VM mailbox) or, you can press
&QI7UQ to
return to the calling party.