Toshiba CTX IPT/DKT Telephone User Manual


 
Advanced Operation
Call Park Orbits
48 Strata CIX and CTX IPT/DKT Telephone 08/07
To park a call
1. While on a call, press
Park in Orbit
...or Cnf/Trn + #33. The LED flashes green (consultation-hold). If you were on
an extension during the call, and you have line button on your telephone, the line
LED will flash until the call is picked up (depending on programming).
2. Specify the Park Orbit using one of the following:
Press
*
and the system automatically selects a General Park Orbit between
7000~7019. The chosen orbit appears on the LCD.
Enter a valid extension.
Press
# and the system automatically selects your extension as the orbit.
3. Hang up. The caller’s extension or line number and the orbit number are shown. If
the parked call is not retrieved within a specified time, the call rings back to your
telephone. When a parked call recalls your telephone, the LCD shows the line or
extension that is recalling and the orbit number.
To retrieve a parked call
1. Press
Park in Orbit
...or press your extension button + #32.
2. Enter the Orbit Number where the call is parked or
# for the extension from which
you are calling. You cannot use
*
to retrieve a parked call. The extension LED
flashes at the in-use rate when the call is retrieved.