Filter
Top Products
IPT2010-SDC
IPT2010-SDC Programming
88 Strata CIX and CTX IPT/DKT Telephone 08/07
IPT Initialization
The IPT2010-SDC has a fourth initialization option (FB4). ACO Default.
1. Press 3+6+9+Hold (simultaneously).
2. Press
Vol s then press Hold.
3. Press
FB04. Revert to factory default ACO settings or Use the saved ACO
settings. (LED On = revert to factory default, LED OFF = use the saved ACO
settings). This will set all the IPT2010-SDC program options to factory default
values.
IPT2010-SDC Headset Transmit Level Adjustment
The IPT2010-SDC headset transmit level for ACO and IPT operation are set by
programming from the station.
1. Press 3+6+9+Hold (simultaneously).
2. Press
# then press Hold.
3. Set the headset transmit level using FB1, FB2 and FB3 as shown in the table
below.
4. Press Hold again.
Headset Transmit Levels
Transmit Level FB1 FB2 FB3 IPT Level ACO Level
Max. (louder) OFF OFF OFF +12 dB4 +8 dB
ON OFF OFF +8 dB +8 dB
OFF ON OFF +4 dB +4 dB
(Default) ON ON OFF 0 dB 0 dB
OFF OFF ON -4 dB -4 dB
ON OFF ON -8 dB -7 dB
OFF ON ON -12 dB -7 dB
Min. (softer) ON ON ON -16 dB -7 dB