Toshiba CTX IPT/DKT Telephone User Manual


 
Advanced Operation
Soft Keys
32 Strata CIX and CTX IPT/DKT Telephone 08/07
Soft Keys
When Soft Keys are on, they replace the functions on the SK1, SK2, SK3 and SK4
buttons below the LCD. The following table defines Soft Key Prompts.
Table 1 Soft Key Prompts
Soft Key Definition
ABR
Activates Automatic Busy Redial after dialing a busy outside telephone number.
ACB
Activates Automatic Callback after reaching a busy station, CO line, or CO Line group.
BUSY
(Busy Override) Sends a call-waiting tone to a busy station.
CONF
Initiates or completes a conference.
EXEC
(Executive Override) Breaks into the conversation of a busy called station.
EXIT
Exits you from a conference; remaining parties are connected.
JOIN
Joins all parties to a conference while on a conference call.
LINE
Adds a CO line to an existing call while in the Conference mode. The LCD prompts
you to access a CO line after you press this key.
MESG
Sets a message waiting indication at a busy or unanswered station.
OVRD
Overrides options, busy mode, or overrides Do Not Disturb mode.
PGE
Enables you to enter a Page Group number (01~16).
RING
Makes a called station ring when making a voice announce call to the station.
RLS
Disconnects a call and returns telephone to the idle state.
RTRN
Terminates a feature operation and to return to a previously displayed state.
SPLT
Enables you to break off from a conference call with another conference call member
for a private conversation (split). You can use the Join key to reconnect both of you
back into the conference. You must be a conference master to use this. See
instructions for Conference Split/Join/Drop for further instruction.
STA.
Adds a station to an existing call while in the Conference mode. The LCD prompts you
to dial a station number after you press this key.
TALK
Makes a voice announcement to a called station that is ringing.
TRNS
Initiates or completes a Transfer while on an outside call. Press once for an immediate
or announced transfer, depending on system programming. Pressing TRNS again
completes the transfer.