ADM/DSS Console
ADM
138 Strata CIX and CTX IPT/DKT Telephone 08/07
ADM
Digital add-on Modules (DADM) can be connected to IPT and 3000/3200-series
telephones to provide additional buttons. Certain models are not interchangeable.
The DADM3120/3220 (shown below right) works with the DKT3000/3200-series
telephones and the IPT1020-SD. The DADM3120/3220 works with 3000/3200-series
telephones only.
The IP add-on Module (IADM) offers all the same features of the DADM3120/3220.
Buttons and LEDs
The DADM31 20/3220 provides 20 feature buttons to their respective telephones.
These flexible feature buttons can be assigned as CO line, Directory Number, DSS,
One Touch Speed Dial or any other flexible feature.
Up to two DADMs can be attached to a telephone to
provide 40 buttons to supplement the telephone's 10
or 20 buttons.
Each DSS button and Line button has an LED that
provides a status of the outside line or station
assigned to it. The DSS button acts like a speed dial
button to a specific extension.
• A station or line shows steady red when in use by
others; green when in use by the DADM.
• A DSS LED will flash red while making a call
and turn intermittently green once connected.
• An outside Line LED is green when the outside
line is in use by the DADM console user. It is red
if it is in use by another telephone user.
Note Button numbers in the figure to the right are
examples only.
First ADM Second ADM
2038
209
208
207
206
205
204
203
202
201
200
219
218
217
216
215
214
213
212
211
210
229
228
227
226
225
224
223
222
221
220
239
238
237
236
235
234
233
232
231
230