Filter
Top Products
MEMORY DIALING
19
4 Enter the memory address (0 to 9) at which you wish to store the
phone number stored in step 3.
You will hear a long beep when the number is successfully stored.
To store more telephone number, repeat steps 1 to 4.
5 Return the handset to the base unit.
6 Record the telephone numbers on the SPEED DIAL INDEX CARD,
and place it on the back of the handset.
Basics
EXAMPLE: To store 9012345 in memory address 3
Replacing a telephone number
Just store the new number following the same steps in “STORING
NUMBERS.”
The new number will replace the previously stored one.
INSERTING A PAUSE IN MEMORY
Use (redial/pause) to make an outgoing call through a PBX or
long distance. Each time you press , a pause of about two
seconds is inserted during the dialing sequence. If more than two
seconds are needed, press twice.
EXAMPLE: To store “0 PAUSE 1234567890” in memory address 4,
press:
4
MEM
0
9
8
7
6
5
4
3
2
1
RDL/P
0
MEM
RDL/P
RDL/P
RDL/P
3
MEM
5
4
3
2
1
0
9
MEM
DIALING A STORED NUMBER
1 Pick up the handset and press .
2 Press the .
3 Press the memory location number (0-9).
The stored number will be dialed.
NOTE:
If you enter a memory address which does not have any stored number, error
beeps sound.
MEM
TALK
FT-8901.qx 1/5/1 11:28 AM Page 19