Topcom Butler 5400
6 Topcom Butler 5400
2.2 ICONS
Call in progress New voice mail**
End Call Keypad locked
Missed calls in call list* Alarm set
Handset ringer volume OFF List contains unread or missed calls
not yet consulted
Within base range New SMS message received***
Handset not registered
or out of range
Battery status
Empty
Low battery
Medium
Full
* If the Caller line identification service is available on the telephone line
** If the Phonemail service is available on the telephone line
*** If the SMS service is available on the telephone line
2.3 BASE LIGHTS
Missed calls indication
New SMS messages received
Handset on base
- Off: No base power connected
- ON: power connected
- Blinking slowly: Off hook or SIM card copy
- Blinking rapidly: during registration mode or Phonemail*
* If the Phonemail service is available on the telephone line
2.4 NAVIGATING THE MENU
The Butler 5400 has a menu system which is easy to use. Each menu leads to a list of options. The menu map is shown
on the following paragraph.
When the handset is switched on and in standby, press the option button under “MENU” to open the main menu.
Press the or button to scroll to the menu option you want. Then press OK to select further options or confirm
the setting displayed.
Exit or go back one level in the menu
To the previous level in the menu, press BACK.
To cancel and return to standby at any time, press . If no button is pressed for 60 seconds, the handset returns to
standby automatically.