Topcom Butler 5400
ENGLISH
Topcom Butler 5400 21
11 TROUBLESHOOTING
12 TECHNICAL DATA
• Standard: DECT (Digital Enhanced Cordless Telecommunications)GAP (Generic
Access Profile)
• Frequency range: 1880 MHZ to 1900 MHz
• Number of channels: 120 duplex channels
• Modulation: GFSK
• Speech coding: 32 kbit/s
• Emission power: 10 mW (average power per channel)
• Range: 300 m in open space /50 m maximum inhouse
• Numbr of handsets: Up to 5
• Powersupply base 230V / 50 Hz / 35 mA 6,5V DC 180mA & 150mA Model: SD35-405
• Handset Batteries: 2 rechargeable batteries AAA, NiMh 750mAh 1,2V
• Handset autonomy: 100 hours in standby
• Talk time: 10 hours
• Charging time: 6-8 hours
• Normal conditions of use: +5 °C to +45 °C
• Flash time 100 or 250 ms
13 DEFAULT SETTINGS
• Handset name: B5400
• Auto talk: ON
• PABX code Empty (Off)
• Handset ring volume: 3
• Ear volume: 3
• Melody Handset: Internal calls = 1 and external = 5
• Menu color: Blue
• Base ring volume: 3
• Base ringtone: 1
• Pin code: 0000
• Key lock: Off
• SMS melody: On = Morse
Symptom Possible cause Solution
No display Batteries uncharged Check the position of the batteries
Recharge the batteries
Handset turned OFF Turn ON the handset
No tone Telephone cord badly connected Check the telephone cord connection
The line is occupied by another handset Wait until the other handset hangs up
The icon flashes
Handset out of range Bring the handset closer to the base
The base has no power supply Check the mains connection to the base
The handset is not registered on the
base
Register the handset on the base
Base or handset do not ring The ringing volume is zero or low Adjust the ringing volume
Not possible to transfer a call on PABX The FLASH time is too short Set the unit to Long Flash time
Telephone does not react to pressing the
keys
Manipulation error Remove the batteries and put them back
in place